Conventional Smoke Detector

C-9102 Conventional Photoelectric Smoke Detector is non-addressable. Used together with end of line unit, it can connect with compatible control panels to process detection signals. It shows fire alarm by LED indicators and transmits the fire signal to the control panel. Using infrared scattering technology, the smoke density can be detected.

Description

C-9102 Conventional Photoelectric Smoke Detector is non-addressable. Used together with end of line unit, it can connect with compatible control panels to process detection signals. It shows fire alarm by LED indicators and transmits the fire signal to the control panel. Using infrared scattering technology, the smoke density can be detected. The detector receives very weak infrared light under normal smokeless condition. If smoke particles enter the chamber, the received light signal will increase by scattering. When smoke density reaches a pre-set level, the detector will alarm out. In order to reduce interference and power consumption, the emitting circuit works in pulse mode to prolong the life of IR LED.

Reviews

There are no reviews yet.

Be the first to review “Conventional Smoke Detector”

Your email address will not be published. Required fields are marked *

Standard: EN54-part5
    Operating Voltage: 24VDC
    Operating Current:
           Standby Current: 0.06mA
           Alarm Current: 30mA
    Operating Environment:
           Temperature: -10℃ ~+50℃
           Relative Humidity: 95%
     Dimensions: Diameter 100mm, Height 56mm